No Products in the Cart
@li xia hello Could you tell what the GPIO5, GPIO12 and GPIO13 are used for? Thanks you.
@li xia hello Could you tell what the GPIO5, GPIO12 and GPIO13 are used for? Thanks you.
I want to put the X728 into the same state as "Force shutdown (Press and hold for >8 seconds)" but after the Pi4 was powered off from software. How can I power off the X728 board after the Pi4 ...
Apparenly on a freshly installed Ubuntu it works. Interesting...
Tested on Raspberry OS lite. Seems to work. sudo hwclock -v hwclock from util-linux 2.33.1 System Time: 1608307733.168204 Trying to open: /dev/rtc0 Using the rtc interface to the clock...
I purchased the X728 ups hat to be used with a Pi 4. I am having issues with RTC. I'm running Ubuntu Server 20.04. To rule out issues as my fault, here is what I did: - in /b...
