trying to install x735 v2.5 software on RPI 4 - 64 gb and have run into a problem, see below. Not sure what to do as I cant get the cooling fan to work?
pi@raspberrypi:~ $ sudo apt-get install pigpio python-pigpio python3-pigpio git clone https://github.com/geekworm-com/x735-v2.5
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package clone
E: Unable to locate package https://github.com/geekworm-com
E: Couldn't find any package by glob 'https://github.com/geekworm-com'
E: Couldn't find any package by regex 'https://github.com/geekworm-com'
If I run seperately I get:
pi@raspberrypi:~ $ git clone http://github.com/geekworm/x735-v2.5
-bash: git: command not found
What should I be typing?
Originally I purchased an x829 with the x735 hat. I did get it working but a couple of days later I received my X708-A1 battery holder and the x708 hat.
I fully assembled the unit with the x829 on the bottom, the x708-A1 next the RPI4 and topped off with x708 power management hat.
I purchased from Amazon a USB 3.0 powered hub, a longer USB cable to connect the x829 into the RPI4. However I waiting for the longer 2.54mm Jumper cable, should get them today.
The problem I'm having is I can not remove the x735 software.
sudo ./uninstall.sh
I get: sudo ./uninstall.sh: command not found?
Also may system has been shutting down on it's own, even when in the middle of typing a command.
Thanks
Brent
Sorry for adding a second post, but due to the pandemic, it takes a long time, after it gets to the States, so ordered a lager coolong fan from Amazon, see attached photo:
It is a DV:5v fan drawing 0.18 A. but when I plug it into any of the 5v it does not work.
Also my RPI4 just rebooted on it's own as I was typing this.
Any help would be appreciated.
Brent
Hello，Brent
could you please send some installation pictures by email? and please tell us your order number.thanks. support@geekworm.com
Best regards
Did you find any info out ?
My x735 v2.5 software on RPI 4 - 64 gb run for angry gran is ok and there is no problem.
